SpinOlution Lazy Kate

The SpinOlution Lazy Kate holds four Bobbins and can be used with the standard SpinOlution Mach and Hopper bobbins or the smaller Bee and Echo Bobbins

With the Mach and Hopper bobbins there is a brake system to keep the bobbins from spinning out of control. The faster you pull the thread, the further from the brake the bobbin gets, allowing it to spin free.

The SpinOlution Lazy Kate can be stored in the upright position so that it takes up less room but should be used in the horizontal position.

Size – (LxWxD): 19 in X 7.5 in X 7 in (48 cm x 19 cm x 18 cm) in the horizontal position

Buy the SpinOlution Lazy Kate here

YouTube movie of the SpinOlution Lazy Kate in operation

1. The SpinOlution Lazy Kate in use, including setup and storage (2 min 27 secs)



 

And other SpinOlution accessories including SpinOlution 3 Drop Spindle set with weights, Mach/Echo/Bee bobbins & drive bands, etc.

 

Last updated on 21 June 2010
Website and photos by Mike Roberts © 2008-10 WildFibres